Returns and Refunds Policy

1. Right of Withdrawal:

The customer has the right to withdraw from the purchase of VandalStop within 14 calendar days of receiving the product, without having to give any reason.

To exercise this right, the customer must notify VandalStop of their decision to withdraw by email to support@vandalstop.es.

2. Return Conditions:

The product must be returned in its original packaging and in perfect condition, including all its components (impact sensors, control unit, speaker, power supply) and accessories.

Returns of products that have been opened and handled will be accepted, provided the customer has treated them with due care and they have not been damaged through misuse.

3. Reduction in Product Value:

VandalStop reserves the right to reduce the refund if the product has been damaged through excessive handling by the customer.

Excessive handling includes, among others:

  • Visible physical damage to the impact sensors.
  • Damage to the control unit due to incorrect connections or improper handling.
  • Damage to the speaker due to knocks or exposure to extreme conditions.
  • Damage to the power supply due to power surges or incorrect connections.
  • Tampering with the security seals.
  • Software installation or pairing with mobile apps.

The reduction in the refund will be determined according to the type and severity of the damage, based on a grading system established by VandalStop.

4. Return Process:

The customer must send the product to the address provided by VandalStop and bear the shipping costs.

Once the product has been received, VandalStop will carry out a detailed inspection of each component to determine its condition.

If the return is accepted, the corresponding amount will be refunded within 3 working days, using the same payment method used by the customer.

5. Exceptions:

Returns will not be accepted in the following cases:

  • Intentional damage to the product.
  • Improper handling that has caused serious damage.
  • Missing components or accessories.
  • Cut or soldered cables.
  • Once the hardware has been installed or the device has been paired with the app.

VandalStop reserves the right to refuse returns that do not meet these conditions.

6. Warranty:

This returns policy is supplemented by the product’s legal warranty, which covers manufacturing and operating defects for a period of 2 years.

Warranty, Costs and Troubleshooting Guide

Technical procedure document for VandalStop devices.


1. Warranty Policy

  • VandalStop control unit: 2-year legal warranty against manufacturing defects.
  • Sensors (Impact and Door): 1-year limited warranty.
  • Accessories and Cables: Dead-on-arrival warranty (immediate replacement if they fail on first installation).

Critical Exclusion: The right of withdrawal no longer applies once the hardware has been physically installed in a machine or the device has been paired with the mobile app.

Coverage Exclusions:

  • Tampering with the security seals on the control unit.
  • Cables cut, stripped or soldered outside the factory.
  • Damage caused by power surges (power supply or mains).
  • Damage caused by excessive handling or incorrect installation.

2. Spare Parts and Component Prices (RRP)

Note: Shipping costs not included.

Component Price (excl. VAT)
8-port control unit (without power supply) €250.00
Power Supply (12V 2A) €14.00
VandalStop Speaker €35.00
Machine Sensor + 5m Cable (Standard kit) €45.00
Machine Sensor (Sensor only) €40.00
Door Sensor + 5m Cable (Magnetic) €65.00
Door Sensor (Sensor only) €55.00
Sensor Cable (connector included) €2.00 / metre
Audio Cable (connector included) €2.50 / metre
VandalStop Sticker (Small / Large) €5.00 / €20.00
Accessory Kit (10 Cable Clips + 10 Magnets) €5.00

3. Troubleshooting Guide

Section A: Power and Start-up

Issue: The device does not switch on.
Check: Check the power LED (next to the power port).
Solution: Replace the power supply. If the problem persists, send the control unit to technical service.

Section B: Sensor Issues

Issue: A sensor stops working.
Check: Check the connector on the control unit and the condition of the cable. Swap the port with a working sensor.
Solution: If the fault follows the port, it is the control unit. If it follows the sensor, replace the sensor/cable.

Issue: Loss of sensitivity.
Check: Potentiometer adjustment: turn the adjustment screw on the sensor itself (see Instruction Manual).
Solution: Adjust the sensitivity. If it does not respond to the change in sensitivity, replace the sensor.

Issue: Random detection.
Check: Check whether the cable is near sources of interference or whether the connection is loose.
Solution: Secure the cable with the Accessory Kit. Check the cable’s integrity.

Section C: Audio and Alarms

Issue: No sound (detects but does not sound).
Check: Check the audio port and the condition of the cable. If the red light on the control unit does NOT come on, the unit may be in silent mode.
Solution: Turn up the volume on the unit (+) or via the App. Check the speaker connection.

Section D: Control Unit and Notifications

Issue: Notifications not arriving.
Check: Check the status LED (Green). Solid = OK / Flashing = No connection.
Solution: Restart the router/access point. Check coverage at the machine’s location.


4. Technical Support Channels

1. Remote Support: Enquiries by email to support@vandalstop.es

2. Video Call Support: By appointment, a technician will guide the operator in real time.

Note: Improper handling of the components automatically voids any warranty described here.

Agenda una demo

Agenda una demo y te mostraremos el funcionamiento




This will close in 0 seconds